
Image: DJI DJI has announced its latest wireless lavalier microphone, the DJI Mic 3. The new device combines the compactness of the Mic Mini, which was released less than a year ago, with the functionality and higher-end features of the Mic 2.
Like the Mic Mini, the Mic 3 is a discrete option. The transmitter portion weighs 16g (0. 56oz), which is only slightly heavier than the Mic Mini and 12g (0. 42oz) lighter than the Mic 2. It can be attached to subjects with the detachable, rotating clip or with an included magnet. It also shares the Mic Mini's transmission range in ideal conditions, promising to connect at distances of up to 400m (just under 1/4 mile). That's a substantial bump from the Mic 2's 250m (820') range.
The Mic 3 is small and discreet.
Image: DJI
The Mic 3 gains some firsts from DJI, including the first DJI mic to offer voice tone presets. Users can select between Regular, Rich and Bright, which will professionally tune voices by boosting low frequencies or enhancing high frequencies. DJI says it will be helpful for interviews with multiple people who have different vocal characteristics.
The new mic is also the first DJI mic with two Adaptive Gain Control modes: Automatic and Dynamic. Automatic mode can suppress sudden volume spikes and prevent clipping. This mode promises to be helpful for outdoor environments with dramatic volume, such as sporting events. Dynamic mode automatically adjusts gain in response to volume changes to maintain consistent loudness, which DJI says is ideal for studio settings.
The windscreen helps cut down wind noise even more. It's also available (separately) in five different colors.
Image: DJI
Mic 3 provides Lossless Audio to deliver uncompressed 48kHz 24-bit audio directly to the receiver. It also offers two-level active noise canceling. DJI didn't specify if it carried over the Mic 2's 'Intelligent' noise cancellation, which doesn't require manual selection of a level.
It keeps the 32-bit float internal recording found on the Mic 2. However, it adds dual-file internal recording: one with the original track, and another with the algorithm-enhanced version. Unfortunately for some, the transmitter packs lack a 3. 5mm jack, just as the Mic 2 did. As a result, users won't be able to use traditional lav mics.
Image: DJI
The system can work with up to four transmitters and eight receivers at once (though those have to be purchased separately), making it a worthwhile option for large group recordings. Additionally, the Mic 3 Receiver offers Quadraphonic mode, which supports independent output of four audio tracks, though only when paired with select Sony cameras or computer software.
In terms of battery life, DJI says the Mic 3 transmitter can last up to eight hours, while the receiver lasts up to 10 hours. The optional charging case provides 2. 4 full charges.
DJI says a five-minute charge will provide two hours of battery life.
Image: DJI
The DJI Mic 3 will be on display at IFA in Berlin from September 5-9. It is available with two transmitters, one receiver and the charging case, or users can opt for a single transmitter and receiver with no charging case.
Unfortunately for US users, as has been the case with other DJI releases lately, the Mic 3 will not be available for sale in the US through DJI
Press release:
DJI Introduces the Most Advanced Mini Wireless Microphone with DJI Mic 3
Expanding the DJI OsmoAudio™ Ecosystem, DJI Mic 3 is compact, lightweight, and discreet – with premium audio and a smarter experience
Aug 28, 2025 – DJI, the global leader in civilian drones and creative camera technology, today announced DJI Mic 3, an ultralight wireless microphone offering powerful performance and unmatched versatility. Building on previous generations of the DJI Mic series, Mic 3 supports up to four transmitters and eightrst is the dual-file 32-bit float internal recording with 32 GB of storage.
Lightweight, Versatile, and Ready to Go
The DJI Mic 3 Transmitter is compact and discreet, weighing just 16 grams. The microphone angle can be flexibly adjusted with the detachable, rotating clip, ensuring optimal audio capture no matter how it’s attached. It can be worn with either a magnetic or a clip-on attachment. The DJI Mic 3 windscreens can also be purchased in five different colors to easily match clothing or the environment.
Creators can easily bring Mic 3 along from location to location for multi-scene shooting while recharging on the go. The all-in-one charging case neatly holds two transmitters and one receiver. The transmitters can be stored without needing to remove the windscreen and magnetic clip. There is also space for the magnets and locking cables.
An Upleveled, Premium Audio Experience
Crafted to offer all content creators an unprecedented level of control and creativity, Mic 3 is equipped with intelligent features that enable dynamic, high-quality sound. It is the first DJI microphone to feature two Adaptive Gain Control modes. For outdoor environments with dramatic volume, such as sporting events, Automatic mode suppresses sudden volume spikes and prevents clipping. Meanwhile, Dynamic mode automatically adjusts gain in response to volume changes, ensuring consistent loudness - ideal for quiet indoor settings like studios.
Mic 3 is the first DJI microphone to offer three voice tone presets: Regular, Rich, and Bright. Ideal for interviews with multiple people with different vocal characteristics, this feature professionally tunes voices, boosting low frequencies to reduce muddiness or enhancing high frequencies to improve clarity.
Simultaneously, two-level active noise cancelling reduces background sounds such as air conditioning to deliver crisp and clear audio. With the windscreen attached, wind noise can be further reduced. Finally, the Lossless Audio feature enables the transmitter to deliver uncompressed 48kHz 24-bit audio directly to the receiver, capturing audio in stunning, high-fidelity detail.
Flexibility Made for Collaboration, Versatility and Reliability
With its capacity of up to four transmitters and eight receivers at once (additional transmitters and receivers are sold separately), you'll get crystal-clear audio on every device whether it’s a group interview or multi-camera shoots, making post-production a breeze. When set to Quadraphonic mode, the DJI Mic 3 Receiver—paired with select Sony cameras or computer software—supports independent output of four audio tracks. This enables precise track separation and flexible mixing, giving you greater creative freedom in post-production.
For complex, large environments such as trade shows or sporting events, Mic 3 features an impressive range of 400 meters and strong resistance to interference*, with automatic frequency hopping between 2. 4GHz and 5GHz bands ensuring rock-solid transmission*.
Offers Dual-File 32-bit Float Internal Recording and Timecode Support for Easier Post-production
Internal recording protects material from wireless interference or device issues, ensuring users never need to worry about lost audio. The Mic 3’s dual-file internal recording saves both the original track and the algorithm-enhanced version. This allows for creative flexibility and simplifies post-production processing. With two internal recording specifications - either 24-bit or 32-bit floating point - Mic 3 provides a dynamic range that adapts better to complex sound environments, able to capture every nuance of a voice from a whisper to a shout. The transmitter offers high-precision timecode functionality, embedding timecode data during internal recording. Within a 24 hour period, the timecode won’t deviate for more than one frame*, guaranteeing precise synchronization across multiple cameras and allowing effortless alignment of footage in post-production.
Powering All-Day Creation
A fully charged Mic 3 transmitter lasts up to eight hours*, and the receiver lasts up to 10 hours*. The charging case provides 2. 4 full charges, achieving 28 hours of extended use. A five-minute quick-charge can power the DJI Mic 3 for two hours*, while just 50 minutes is needed for a full charge*. The Mic 3 also offers multiple power-saving features to prevent the need for recharging. For example, Auto Power-Savings puts the receiver and transmitter to sleep if not in use, while Auto Power-Off turns them off after a period of inactivity.
Simple, Straightforward Connection within DJI Ecosystem and Beyond
With a direct connection to the DJI OsmoAudio™ ecosystem, DJI Mic 3 pairs with Osmo 360, Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 without a receiver, delivering premium audio while minimizing the amount of gear needed and simplifying a creator’s workflow. To connect with other devices, Mic 3 features a locking 3. 5mm TRS output port, a 3. 5mm TRRS monitoring port, and a USB-C port. It can also connect directly to smartphones via Bluetooth without a receiver.
For more information about DJI Mic 3 and its remarkable features, please visit:
https://www. dji. com/mic-3
* All data was measured using a production model in a controlled environment. For more information, visit: https://www. dji. com/mic-3
2025-8-28 15:00